New Holland CX720 Repair Manual page 4049

4. Slide the new bearing and retainers onto the shaft
with the locking end of the bearing toward the end of
the shaft.
5. Secure the bearing assembly to the auger housing
using two carriage bolts, nuts, and lock washers (1)
with the speed sensor (2) mounted at the top.
Set the lock collar (3) onto the end of the bearing.
Engage the collar with a hammer and punch opposite
the direction of rotation. Tighten the set screw (4).
6. Attach the speed sensor cam (1) to the end of the
shaft using cap screw and lock washer (2).
Install the access door.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 57
4
40013926
5
40013924_1341
6
40013923_1342