Return auger drive system Gearbox - Assemble (K.62.C.43.46 -
F.10.A.20)
1.
Output
Install the inner snap ring (1) into the groove in the
gearbox case.
2.
Turn the gearbox case over.
Pack the two bearings with NLGI 2 grease.
Install the bearings (1) into the gearbox case.
Tap the bearings lightly until seated against the snap
ring.
3.
Install the outer snap ring (1) into the groove in the
gearbox case.
Place NLGI 2 grease above the bearing in the gear-
box case.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 21
1
20015080
2
20015081
3
20015082