4.
Use a suitable puller (1) to remove the drive sheave
(2), from the input shaft.
5.
Remove the key (1) from the tapered end of the input
shaft (2).
Drive both roll pins (3) from the safety clutch (4) and
input shaft (2).
6.
Remove the safety clutch (1) from the input shaft (2).
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 8
4
40015047_1330
5
40015048_1331
6
40015049_1332