Cross auger drive system - Assemble (K.62.C.41 - F.10.A.20)
1.
Secure the sheave (1) in a vise. Attach the clutch
housing to the shieve using six cap screws (2) Install
a new sleeve (3) if it had been removed.
2.
Set the assembly on a table with the inside of the
housing pointing up. Apply a liberal coating of grease
to the inside surface of the housing.
3.
Apply a liberal coating of grease to the pockets of the
pin cylinder.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 11
1
20013907_1333
2
20013909
3
20013910