Shoe drive system Lower gearbox - Backlash (K.62.B.45.47 -
F.45.A.11)
1.
Clamp the input shaft (1) in a vise.
2.
Check the backlash of gears (2) and (3), as follows:
3.
Measure the maximum, angular, displacement (A),
of sheave (B), by measuring the distance (C). The
distance (C), should be 0.1 - 0.6 mm.
4.
If distance (C), is not within 0.1 - 0.6 mm, add or re-
move shims (4) to obtain the correct backlash. Re-
peat step 3.
5.
With the backlash correctly adjusted, and with the
gearbox bolted together, use a grease gun to fill
the gearbox through the grease nipple, with NLGI 2
grease until the grease exits the breather.
CROP PROCESSING - CLEANING Primary cleaning
K.62.B / 86
1
20015044
2 4/7/2006