New Holland CX720 Repair Manual page 4065

Cross auger drive system - Assemble (K.62.C.41 - F.10.A.20)
Cross auger drive system - Disassemble (K.62.C.41 - F.10.A.25)
Cross auger drive system - Install (K.62.C.41 - F.10.A.15)
Cross auger drive system - Remove (K.62.C.41 - F.10.A.10)
Cross auger drive system - Test (K.62.C.41 - F.40.C.01)
E0015-03-Left Returns RPM Sensor Shorted To High Source (K.62.C.95.80 - G.30.B.54)
E0015-04-Left Returns RPM Sensor Shorted To Low Source (K.62.C.95.80 - G.30.B.53)
E0015-05-Left Returns RPM Sensor Line Disconnected (K.62.C.95.80 - G.30.B.50)
CX720 Series 1206 - 1237, CX740 Series 1206 - 1237, CX760 Series 1206 - 1237, CX780 Series 1206 - 1237,
CX820 Series 1206 - 1237, CX840 Series 1206 - 1237, CX860 Series 1206 - 1237, CX880 Series 1206 - 1237
E0015-05-Left Returns RPM Sensor Line Disconnected (K.62.C.95.80 - G.30.B.50)
CX720 Series 1238 and above, CX740 Series 1238 and above, CX760 Series 1238 and above, CX780 Series
1238 and above, CX820 Series 1238 and above, CX840 Series 1238 and above, CX860 Series 1238 and
above, CX880 Series 1238 and above
E0018-03-Right Returns RPM Sensor Shorted To High Source (K.62.C.95.80 - G.30.B.54)
E0018-04-Right Returns RPM Sensor Shorted To Low Source (K.62.C.95.80 - G.30.B.53)
E0018-05-Right Returns RPM Sensor Line Disconnected (K.62.C.95.80 - G.30.B.50)
CX720 Series 1206 - 1237, CX740 Series 1206 - 1237, CX760 Series 1206 - 1237, CX780 Series 1206 - 1237,
CX820 Series 1206 - 1237, CX840 Series 1206 - 1237, CX860 Series 1206 - 1237, CX880 Series 1206 - 1237
E0018-05-Right Returns RPM Sensor Line Disconnected (K.62.C.95.80 - G.30.B.50)
CX720 Series 1238 and above, CX740 Series 1238 and above, CX760 Series 1238 and above, CX780 Series
1238 and above, CX820 Series 1238 and above, CX840 Series 1238 and above, CX860 Series 1238 and
above, CX880 Series 1238 and above
Return auger - Install (K.62.C.53 - F.10.A.15)
Return auger - Install (K.62.C.53 - F.10.A.15)
Return auger - Remove (K.62.C.53 - F.10.A.10)
Return auger - Remove (K.62.C.53 - F.10.A.10)
Return auger - Replace (K.62.C.53 - F.10.A.30)
Return auger Bearing - Replace (K.62.C.53.22 - F.10.A.30)
Return auger drive system Gearbox - Assemble (K.62.C.43.46 - F.10.A.20)
Return auger drive system Gearbox - Assemble (K.62.C.43.46 - F.10.A.20)
Return auger drive system Gearbox - Disassemble (K.62.C.43.46 - F.10.A.25)
Return auger drive system Gearbox - Disassemble (K.62.C.43.46 - F.10.A.25)
Return auger drive system Gearbox - Install (K.62.C.43.46 - F.10.A.15)
Return auger drive system Gearbox - Remove (K.62.C.43.46 - F.10.A.10)
Return auger Paddle - Replace (K.62.C.53.20 - F.10.A.30)
CROP PROCESSING - K
CLEANING Tailings return system - 62.C
Index
2 4/7/2006
K.62.C / 73
11
4
9
7
15
61
62
63
65
67
68
69
71
43
49
34
40
52
60
21
24
27
31
19
16
56