New Holland CX720 Repair Manual page 4044

Return auger - Replace (K.62.C.53 - F.10.A.30)
1. Remove the left or right returns auger in accordance
with the appropriate section.
2. Remove the discharge paddles (1).
NOTE: Right side shown, left side is similar.
3. Remove the access cover from the auger. Punch out
the double roll pin (1) securing the gearbox shaft to
the auger (2).
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 52
1
40013933
2
40013931_1344
3
20015067_1345