New Holland CX720 Repair Manual page 4039

13. Grease the ID of the slip clutch (1) with NLGI 2
grease and install onto the input shaft, making sure
to align the roll pin holes.
14. Install the key (1) into the tapered end of the input
shaft (2).
Install both roll pins (3) through the slip clutch (4),
and input shaft (2).
Align the slip clutch pulley with the returns cross
auger pulley by moving the lower gearbox in or out
on the mounting brackets. When alignment is satis-
factory, tighten the gearbox mounting bolts securely.
15. Install the drive sheave (1) onto the input shaft and
secure with the flat washer (2) and bolt (3) Tighten
the bolt securely.
CROP PROCESSING - CLEANING Tailings return system
2 4/7/2006
K.62.C / 47
13
40015049_1308
14
40015048_1309
15
40015046_1310