Canopen; Profinet Io; Usb Service Interface; Table 21: Technical Data - Canopen - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
3.8.8

CANopen

Table 21: Technical Data – CANopen
CANopen input and output process
image max.
No direct access from fieldbus to the process image for I/O modules!
Any data that is required from the I/O module process image must be explicitly
mapped in the CODESYS program to the data in the fieldbus process image and
vice versa! Direct access is not possible!
3.8.9

PROFINET IO

Table 22: Technical Data – PROFINET
Interfaces
MRP
Reduction Ratio
PROFINET input and output process
image max.
No direct access from fieldbus to the process image for I/O modules!
Any data that is required from the I/O module process image must be explicitly
mapped in the CODESYS program to the data in the fieldbus process image and
vice versa! Direct access is not possible!
3.8.10

USB Service Interface

Table 23: Technical Data – USB-Service Interface
Interface type
Specification
Current load capacity
The USB service port should only be used for commissioning and service
purposes.
In normal operation, the port socket must be closed with the included stopper!
USB service port only for removable storage devices!
Only USB sticks should be connected to the USB service port.
2000 words
2 x RJ45 (X11, X12)
Client (X11, X12)
4 ... 512
1024 byte, 1 AR
USB-A
USB 2.0
500 mA
Version 1.2.0, valid from FW Version 03.02.02(14)
Device Description
Manual
49