150 Commissioning
"Modbus Services Configuration" Page
7.8.1.30
The settings for various Modbus services are shown on the "Modbus Services
Configuration" page. The groups are only visible if the e!RUNTIME system is
enabled. Otherwise an information text is displayed.
7.8.1.30.1 "Modbus TCP" Group
Table 88: WBM "Modbus Services Configuration" Page – "Modbus TCP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.
7.8.1.30.2 "Modbus UDP" Group
Table 89: WBM "Modbus Configuration Services" Page – "Modbus UDP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
Disable or enable the Modbus/TCP service here.
Explanation
Disable/enable the Modbus-UDP service here.
WAGO-I/O-SYSTEM 750