Usb Service Interface; Figure 8: Usb Service Interface - X6 - WAGO 750-8215 Manual

36 Device Description
3.3.6

USB Service Interface

Kommuni kati onsansc hlus s
Figure 8: USB Service Interface – X6
The USB service interface is designed as an USB-A socket according to USB
specification 2.0.
The USB service port should only be used for commissioning and service
purposes.
In normal operation, the port socket must be closed with the included stopper!
USB service port only for removable storage devices!
Only USB sticks should be connected to the USB service port.
USB memory stick not included!
Please note that the controller is delivered without a USB memory stick.
To use a memory stick, you must order it separately.
The controller can also be operated without a USB memory stick; use of a USB
memory stick is optional.
</dg_
Only use recommended USB memory stick!
Only use the USB memory stick available from WAGO (item no. 758-879/0000-
4108), since it is suitable for industrial applications subject to environmental
extremes and was developed for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB