Configuring The Slave Pdos; Figure 59: Pdo Mapping Tab - WAGO 750-8215 Manual

262 CANopen Master and Slave
10.3.4.4

Configuring the Slave PDOs

Now, configure the receiving PDOs for the slave (output from the perspective of
the controller) and the send PDOs. The PDOs for the module have already been
created by the Configurator. The eight bits have been placed in the first PDO.

Figure 59: PDO Mapping Tab

Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB