Information" > "Network Details" Submenu; Table 114: "Information" > "Network Details" Submenu - WAGO 750-8215 Manual

174 Commissioning
7.8.2.2.2 "Information" > "Network Details" Submenu
In this submenu, the network and interface properties of the controller are
displayed.
If the EHERNET interfaces are operated in "Switched" mode, a common table
("X1/X2") is displayed for both connections.
If the EHERNET interfaces are operated in "Separated" mode, an individual table
("X1" / "X2") is displayed for each connection.
Table 114: "Information" > "Network Details" Submenu
Parameters
State
Mac Address
IP Address
Subnet Mask
To return to the higher-level menu, press [Q] or [Return].
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
Status of the ETHERNET interface
(enabled/disabled)
MAC address identifies and addresses the controller
Current IP address of the controller and (in brackets)
the reference type (static/bootp/dhcp)
Current subnet mask of the controller
WAGO-I/O-SYSTEM 750