Configuration Of User Filter" Page; User Filter" Group; User Filter N" Group; Table 58: Wbm "Configuration Of User Filter" Page - "User Filter" Group - WAGO 750-8215 Manual

124 Commissioning

"Configuration of User Filter" Page

7.8.1.12

7.8.1.12.1 "User Filter" Group

Table 58: WBM "Configuration of User Filter" Page – "User Filter" Group
Parameters
Count

7.8.1.12.2 "User Filter n" Group

Table 59: WBM "Configuration of User Filter" Page – "User Filter n" Group
Parameters
Source IP address
Source netmask
Source port
Destination IP address
Destination subnet mask
Destination port
Protocol
Input interface
Policy
Click the appropriate [Delete] button to remove a configured filter. The change is
effective immediately.
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
The number of configured user filters is displayed.
Explanation
The source IP address for the respective filter entry
is displayed.
This displays the source network for the
corresponding filter entry.
The source port number for the respective filter entry
is displayed.
The destination IP address for the respective filter
entry is displayed.
The destination network mask for the respective
filter entry is displayed.
The designation port number for the respective filter
entry is displayed.
The permitted protocols for the respective filter is
displayed.
The permitted interfaces for the respective filter are
displayed.
This displays whether the network device is allowed
or excluded by the filter.
WAGO-I/O-SYSTEM 750