Shutdown/Restart - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
</dg_
7.6

Shutdown/Restart

Switch off the power supply to shut down the controller.
To perform a controller restart, press the Reset button as described in the
Section "Triggering Reset Functions" > "Software Reset (Restart)."
Alternatively, you can switch off the controller and switch it back on again.
Do not power cycle the controller after changing any parameters!
Some parameter changes require a controller restart for the changes to apply.
Saving changes takes time.
Do not power cycle the controller to perform a restart, i.e., changes may be lost
by shutting down the controller too soon.
Only restart the controller using the software reboot function. This ensures that
all memory operations are completed correctly and completely.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 97
Manual