Figure 69: "Open" Dialog Window; Figure 70: Module Icon In The Menu Bar; Fup Programming Language; Figure 71: Instance Of The Function Block Diaggetbusstate() In Fup - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
In the menu bar, click on Insert > Additional library. The "Open" dialog
3.
window then opens. Select the "BusDiag.lib" and click [Open] to add it to
the project.

Figure 69: "Open" Dialog Window

In the menu bar, click on the "Module" icon (the box symbol).
4.

Figure 70: Module Icon in the Menu Bar; FUP Programming Language

Press [F2] on your keyboard. The "Input Assistant" dialog window opens.
5.
Click on the option "Standard function blocks" and select the function block
DiagGetBusState().
6. Create an instance of the function block DiagGetBusState(). Enter a name
above the function block.
In the example shown here this is "GeneralBusInformation."

Figure 71: Instance of the Function Block DiagGetBusState() in FUP

CANopen Master and Slave 273
Version 1.2.0, valid from FW Version 03.02.02(14)
Manual