Ports And Services" > "Dns" Submenu; Table 164: "Ports And Services" > "Dns" Submenu - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.8.2.11.11 "Ports and Services" > "DNS" Submenu
This submenu contains the settings for the DNS service.
Table 164: "Ports and Services" > "DNS" Submenu
Menu Item
0. Back to ...
1. State
2. Mode
3. Firewall status
4. Add static hostname
(5 + n). Static Host (n)
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the DNS service.
0. Back to ... Back to the higher-level menu
1. Enable The DNS service is enabled.
2. Disable The DNS service is disabled.
Select the operating mode of the DNS server.
0. Back to ... Back to the higher-level menu
The requests are buffered to optimize
1. Proxy
throughput.
2. Relay All requests are routed directly.
Opens a submenu with firewall settings for the this
service for the interfaces
Enter a new static assignment of IP address to
hostname,
e.g., "192.168.1.20:hostname".
You can enter 10 assignments.
This displays the hostnames for IP addresses.
0. Back to ... Back to the higher-level menu
Opens a submenu to change the
1. Edit
selected assignment
2. Delete Deletes the selected assignment
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 207
Manual