Testing The Network Connection; Figure 33: Example Of A Function Test - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.4

Testing the Network Connection

Carry out a ping network function to check whether you can reach the controller
at the IP address you have assigned in the network.
1. Open the MS DOS prompt window.
To do this, enter the command "cmd" in the input field under Start >
Execute... > Open: (Windows
(Windows
In the MS DOS window, enter the command "ping" and the IP address of
2.
the controller (for example, ping 192.168.1.17)and then press [Enter].
Host entries in the ARP table!
It may also be useful to delete the current host entries in the ARP table with the
command "arp -d *" before executing the "ping" command (as administrator in
®
Windows
"ping" command.
3. Your PC sends out a query that is answered by the controller. This reply
appears in the MS DOS prompt window. If the error message "Timeout"
appears, the controller has not responded properly. You then need to check
your network settings.

Figure 33: Example of a Function Test

4. If the test is completed successfully, close the MS DOS window.
®
7) and then click [OK] or press [Enter].
7). This ensures that older entries will not impair the success of the
Version 1.2.0, valid from FW Version 03.02.02(14)
®
XP) or Start > Search programs/files
Commissioning 95
Manual