Table 120: "Plc Runtime" > "General Configuration" > "Home Dir On Sd Card - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.8.2.3.5 "General Configuration" > "Home Dir On SD Card" Submenu
In this submenu, define if the home directory for the runtime system should be
moved to the memory card.
Table 120: "PLC Runtime" > "General Configuration" > "Home Dir On SD Card" Submenu
Menu Item
0. Back to ...
1. Enable
2. Disable
Insert a memory card before switching the home directory!
When moving the home directory to the memory card, insert a memory card
formatted to support file system. Only the first partition of a memory card can be
accessed at /media/sd and can be used as the home directory.
Perform a reset before switching the home directory!
Stop IEC-61131 applications in use before switching the home directory of the
runtime system.
Restore the device to its initial state using the "Reset" function. Any boot project
is deleted.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Explanation
Back to the higher-level menu
The home directory is moved to the memory card.
The home directory is stored in the internal memory.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 177
Manual