Table of Contents
Advertisement
116 Commissioning
"Routing" Page
7.8.1.9
On the "Routing" page you can find settings and information on the routing
between the network interfaces.
7.8.1.9.1 "General Routing Configuration" Group
Table 49: WBM "Routing" Page – "General Routing Configuration" Group
Parameter
Routing enabled entirely
Click the [Submit] button to apply the change. The changes take effect
immediately.
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
Specify here whether forwarding of IP data packets
is allowed between different network interfaces.
If the box is not checked, the settings under "Static
Routes" are used, without allowing IP data packets
that arrive at the PFC on one network interface to
leave the PFC on different network interface.
If the box is checked, IP packets can be forwarded
between the interfaces.
Other settings may be necessary on this WBM
page.
WAGO-I/O-SYSTEM 750
Advertisement
Chapters
Table of Contents
Troubleshooting
