Firewall" > "Mac Address Filter" Submenu; Table 135: "Firewall" > "Mac Address Filter" Submenu - WAGO 750-8215 Manual

188 Commissioning
7.8.2.5.3 "Firewall" > "MAC Address Filter" Submenu
This submenu contains the settings for the MAC address filter.
Table 135: "Firewall" > "MAC Address Filter" Submenu
Menu Item
0. Back to ...
1. Global MAC address
filter state
2. MAC address filter
whitelist
3. MAC address filter state
X1
4. MAC address filter state
X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Submenu Item / Explanation
Back to the higher-level menu
Enable or disable the global MAC address filter.
0. Back to ... Back to the higher-level menu
The global MAC address filter is
1. Filtered
enabled.
The global MAC address filter is
2. Open
disabled.
Opens a submenu to edit the MAC address filter
whitelist
Enable or disable the MAC address filter for the X1
interface.
0. Back to ... Back to the higher-level menu
The MAC address filter for the X1
1. Open
interface is disabled.
The MAC address filter for the X1
2. Filtered
interface is enabled.
Enable or disable the MAC address filter for the X2
interface.
0. Back to ... Back to the higher-level menu
The MAC address filter for the X2
1. Open
interface is disabled.
The MAC address filter for the X2
2. Filtered
interface is enabled.
WAGO-I/O-SYSTEM 750