Approvals - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
3.9

Approvals

More information about approvals.
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO I/O SYSTEM 750", which you can find via the internet under:
www.wago.com
The following approvals have been granted to the "PFC200; G2; 4ETH CAN
USB" controller (750-8215):
The following Ex approvals have been granted to the "PFC200; G2; 4ETH CAN
USB" controller (750-8215):
The following ship approvals have been granted to the "PFC200; G2; 4ETH CAN
USB" controller (750-8215):
For more information about the ship approvals:
Note the "Supplementary Power Supply Regulations" section for the ship
approvals.
 DOWNLOADS  Documentation  System Description.
Conformity Marking
Ordinary
UL61010-2-201
Locations
Hazardous UL 121201 for Use in Hazardous Locations
Locations Cl I Div 2
TÜV 14 ATEX 148929 X
II 3 G Ex ec IIC T4 Gc
IECEx TUN 14.0035 X
Ex ec IIC T4 Gc
DNV GL
[Temperature: B, Humidity: B, Vibration: B, EMC: B, Enclosure: (*)]
(*) Required protection according to the rules shall be provided upon
installation on board.
Version 1.2.0, valid from FW Version 03.02.02(14)
Device Description
Manual
51