Tcp/Ip Configuration" Page; Ip Configuration (Xn)" Group(S); Table 46: Wbm "Tcp/Ip Configuration" Page - "Ip Configuration (Xn)" Group(S) - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
</dg_

"TCP/IP Configuration" Page

7.8.1.8
The TCP/IP settings for the ETHERNET interfaces are shown on the "TCP/IP
configuration" page.

7.8.1.8.1 "IP Configuration (Xn)" Group(s)

If the switch is enabled, one group ("IP Configuration") is shown for both
connections.
If the switch is disabled, a separate group ("IP Configuration X1" / "IP
Configuration X2") is shown for each connection.
Table 46: WBM "TCP/IP Configuration" Page – "IP Configuration (Xn)" Group(s)
Parameters
Configuration Type
IP Address
Subnet Mask
Click [Submit] to apply changes. The changes are effective immediately.
Explanation
Select a static or dynamic IP address.
Static IP Static IP addressing
DHCP Dynamic IP addressing
BootP Dynamic IP addressing
Enter here a static IP address. This is enabled if
"Static IP" is enabled in the Configuration Type
field.
Enter the subnet mask. This is enabled if "Static IP"
is enabled in the Configuration Type field.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 113
Manual