WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
In the "CAN Parameters" tab, select the required baud rate.
2.
Figure 79: Setting the Baud Rate
3.
To add a slave, right-click CANopen Master[SLOT] and select Attach
sub-element > Generic CAN Device (EDS) ... in the contextual menu.
Figure 80: EDS File "Generic CAN Device"
CANopen Master and Slave 283
Version 1.2.0, valid from FW Version 03.02.02(14)
Manual