Figure 56: Basic Parameters Tab (Slave); Table 192: Description Of Basic Parameters (Slave) - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
No input must be made on the Basic parameters tab.

Figure 56: Basic Parameters Tab (Slave)

Table 192: Description of Basic Parameters (Slave)

Parameters
Module ID
Node ID
Input address
Output address
Diagnostic address
Comment
CANopen Master and Slave 257
Explanation
Recognition of the slave.
Node number of the slave used in the CODESYS
runtime environment.
Starting address for the input data:
The address space always begins at %IB 6000 and
is assigned automatically.
Starting address for the output data:
The address space always begins at %QB 6000 and
is assigned automatically.
Memory area for internal diagnostic processing.
Input field for comments.
Version 1.2.0, valid from FW Version 03.02.02(14)
Manual