298 Diagnostics
The DIA LED indicates following diagnostics:
Table 209: "DIA" Diagnostics LED
Status
Off
Yellow
Red
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
Explanation
There are no
PROFINET
diagnostics.
There are diagnostics
with severity level
"Maintenance
Required" or
"Maintenance
Demanded."
There are diagnostics
with severity level
"Error."
A configuration error
was detected in the
PROFINET
target/actual value
check. The
e!COCKPIT device
configuration does
not match the
PROFINET IO
Controller
configuration (this is
indicated in the
PROFINET IO
Controller
engineering tool).
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
Remedy
---
Proceed according to the message in
the PROFINET IO Controller
engineering tool.
Proceed according to the message in
the PROFINET IO Controller
engineering tool.
Perform a GSDML export in e!COCKPIT
and import the data into the PROFINET
IO Controller engineering tool.