WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.8.1.23.7 "OPC UA" Group
Table 80: WBM "Configuration of Network Services" Page – "OPC UA" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change only takes effect
once the controller restarts. For this purpose, use the WBM reboot function. Do
not shut down the controller too early!
Explanation
Enable/disable the OPC UA service here.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 143
Manual