Technical Data; Mechanical Data; System Data; Power Supply - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
3.8

Technical Data

3.8.1

Mechanical Data

Table 14: Technical Data – Mechanical Data
Width
Height (from upper edge of DIN 35 rail)
Length
Weight
3.8.2

System Data

</dg_
Table 15: Technical Data – System Data
CPU
Operating System
Memory card slot
Type of memory card
3.8.3

Power Supply

Table 16: Technical Data – Power Supply
Power supply
Typ. input current at 24 VDC
Max. input current at 18 VDC
(24 VDC – 25 %)
Power failure time acc. IEC 61131-2
Total current for I/O modules (DC 5 V)
Isolation
Buffer for system power supply!
The system power supply must be buffered to bridge power outages. As the
power demand depends on the respective node configuration, buffering is not
implemented internally.
To achieve power outages of 1 ms to 10 ms according to IEC61131-2, determine
the buffering appropriate for your node configuration and structure it as an
external circuit.
112 mm
65 mm
100 mm
260 g
Cortex A8, 1 GHz
Real-time Linux
(with RT Preemption Patch)
Push-push mechanism,
sealable cover lid
SD and SDHC up to 32 Gbytes
(All guaranteed properties are valid only
in connection with the WAGO 758-
879/000-001 memory card.)
24 VDC (-25 % ... +30 %)
550 mA
761 mA
Depending on external buffering
1700 mA
500 V system/supply
Version 1.2.0, valid from FW Version 03.02.02(14)
Device Description
®
4.9.47-rt37
Manual
47