142 Commissioning
7.8.1.23.4 "HTTP" Group
Table 77: WBM "Configuration of Network Services" Page – "HTTP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Disconnection abort on disabling
If the HTTP service is disabled, the connection to the controller may be
interrupted. Then open the WBM page again.
7.8.1.23.5 "HTTPS" Group
Table 78: WBM "Configuration of Network Services" Page – "HTTPS" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Disconnection abort on disabling
If the HTTPS service is disabled, the connection to the controller may be
interrupted. Then open the WBM page again.
7.8.1.23.6 "WAGO-I/O-CHECK" Group
Table 79: WBM "Configuration of Network Services" Page – "I/O-CHECK" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
Enable/disable the HTTP service here.
Explanation
Enable/disable the HTTPS service here.
Explanation
Enable/disable the WAGO-I/O-CHECK service here.
WAGO-I/O-SYSTEM 750