Figure 40: "Wago Ethernet Settings" - Communication Link - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
Figure 40: "WAGO Ethernet Settings" – Communication Link
Once you have configured "WAGO Ethernet Settings" and have clicked [Apply],
connection to the controller is established automatically.
If "WAGO Ethernet Settings" has already been started with the correct
parameters, you can establish connection to the controller by clicking [Read].
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 217
Manual