Figure 55: Adding A Canopen Slave - WAGO 750-8215 Manual

256 CANopen Master and Slave
EDS Files
The EDS files for current components of the WAGO-I/O-SYSTEM are integrated
in the target files for the controller. The associated EDS files are required for
incorporation of non-WAGO devices. For this, click "Tools" > "Add configuration
file" in the menu bar.
Only use the supplied EDS files for CODESYS 2.3!
The EDS files for the PFC200 CANopen slave, which are supplied in the target
files for the controller, can only be used if the CODESYS 2.3 runtime system is
used on the controller!

Figure 55: Adding a CANopen Slave

Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB