WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.8.2.11.17 "Ports and Services" > "PLC Runtime Services" Submenu
This submenu contains the settings for the PLC runtime system services.
Table 170: "Ports and Services" > "PLC Runtime Services" Submenu
Menu Item
0. Back to ...
1. General Configuration
2. e!RUNTIME
3. Change CODESYS
Runtime firewalling
settings
4. Change CODESYS
WebVisu firewalling
settings
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
7.8.2.11.18 "PLC Runtime Services" > "e!RUNTIME" Submenu
This submenu contains the settings for the e!RUNTIME service.
Table 171: "Ports and Services" > "PLC Runtime Services" > "e!RUNTIME" Submenu
Menu Item
0. Back to ...
1. Webserver
enable/disable
2. Port Authentication
enable/disable
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Explanation
Back to the higher-level menu
Enter the password for port authentication.
Opens a submenu with service settings for
e!RUNTIME
Opens a submenu with firewall settings for the this
service for the interfaces
Opens a submenu with firewall settings for the this
service for the interfaces
Submenu Item / Explanation
Back to the higher-level menu
Enable or disable the Webserver for the
e!RUNTIME web visualization.
0. Back to ... Back to the higher-level menu
1. Enable
The Webserver is enabled.
2. Disable
The Webserver is disabled.
Enter here whether a login is required for connecting
to the device.
0. Back to ... Back to the higher-level menu
1. Enable
Authentication via login is required.
2. Disable
Authentication is not required.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 211
Manual