Configuring Of Canopen Parameters; Figure 67: Configuration Of Canopen Slave Parameters; Table 198: Description Of Canopen Slave Settings - WAGO 750-8215 Manual

270 CANopen Master and Slave
10.3.5.2

Configuring of CANopen Parameters

Figure 67: Configuration of CANopen Slave Parameters

Table 198: Description of CANopen Slave Settings

Parameters
Baud rate
Node ID
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
750-8215 PFC200; G2; 4ETH CAN USB
Explanation
Specify the baud rate to apply for the transfer on the CAN
bus
(default setting: 125000 baud).
PFC's Node ID on the CAN bus.
WAGO-I/O-SYSTEM 750