Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
7.8.2.11.14 "Ports and Services" > "Modbus UDP" Submenu
This submenu contains the settings for the Modbus UDP service.
Table 167: "Ports and Services" > "Modbus UDP" Submenu
Menu Item
0. Back to ...
1. State
2. Firewall status
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.11.15 "Ports and Services" > "OPC UA" Submenu
This submenu contains the settings for the OPC UA service.
Table 168: "Ports and Services" > "OPC UA" Submenu
Menu Item
0. Back to ...
1. State
2. Firewall status
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Submenu Item / Explanation
Back to the higher-level menu
Disable/enable the Modbus UDP service.
0. Back to ... Back to the higher-level menu
1. Enable
The Modbus UDP service is enabled.
2. Disable
The Modbus UDP service is disabled.
Opens a submenu with firewall settings for the this
service for the interfaces
Submenu Item / Explanation
Back to the higher-level menu
Disable/enable the OPC UA service.
0. Back to ... Back to the higher-level menu
1. Enable
The OPC UA service is enabled.
2. Disable
The OPC UA service is disabled.
Opens a submenu with firewall settings for the this
service for the interfaces
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 209
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
