WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
"PLC Runtime" Menu
7.8.2.3
This menu contains other submenus with information and settings for the runtime
system.
Table 115: "PLC Runtime" Menu
Menu Item
0. Back to ...
1. Information
2. General Configuration
3. WebVisu
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.3.1 "PLC Runtime" > "Information" Submenu
This submenu contains other submenus with information on the runtime system
and PLC program.
Table 116: "PLC Runtime" > "Information" Submenu
Menu Item
0. Back to ...
1. Runtime Version
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.3.2 "Information" > "Runtime Version" Submenu
In this submenu, the runtime version is displayed.
Table 117: "PLC Runtime" > "Information" > "Runtime Version" Submenu
Parameters
Version
To return to the higher-level menu, press [Q] or [Return].
Explanation
Back to the higher-level menu
Opens a submenu with information on the runtime
system
Opens a submenu with settings for the runtime
system
Opens a submenu with settings for the Web
visualization
Explanation
Back to the higher-level menu
Opens a submenu to display the runtime version
Explanation
The version of the currently enabled runtime system
is shown. If the runtime system is disabled, "None"
is displayed.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 175
Manual