WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
"Package Server" Menu
7.8.2.8
This menu contains other submenus with functions for firmware backup and
restore, as well as information and setting options for the current system partition.
Table 144: "Package Server" Menu
Menu Item
0. Back to ...
1. Firmware Backup
2. Firmware Restore
3. System Partition
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.2.8.1 "Package Server" > "Firmware Backup" Submenu
This submenu contains a selection option for the data to be saved.
The submenu only appears if a memory card is inserted that does not contain a
bootable system. Otherwise, a message is displayed.
Table 145: "Package Server" > "Firmware Backup" Menu
Menu Item
0. Back to ...
1. All
2. PLC Runtime project
3. Settings
4. System
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
You are taken to the following submenu after making the selection.
Explanation
Back to the higher-level menu
Opens a submenu with functions for the firmware
backup
Opens a submenu with functions for the firmware
restore
Opens a submenu with information and setting
options for the current system partition
Explanation
Back to the higher-level menu
All data is saved.
The PLC runtime project is saved.
The controller settings are saved.
The controller operating system is saved.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 195
Manual