Mass Storage" Page; Device Name>" Group(S); Device Name> - Create New Filesystem" Group(S); Table 70: Wbm "Mass Storage" Page - "<Device Name>" Group - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
</dg_

"Mass Storage" Page

7.8.1.21
A group containing information about the storage volume is displayed for each
storage volume that is found, along with an additional group for formatting (when
this is possible).
The group title contains the designation for the storage volume ("SD card" or
"Internal Flash") and, if this storage volume is also the active partition, the text
"Active Partition".
7.8.1.21.1 "<Device Name>" Group(s)
Table 70: WBM "Mass Storage" Page – "<Device Name>" Group
Parameters
Device
Volume name
7.8.1.21.2 "<Device Name> - create new filesystem" Group(s)
Table 71: WBM "Mass Storage" Page – "<Device Name> - create new filesystem" Group
Parameters
Filesystem type
Volume Name
Data are deleted!
Any data stored in the storage volume is deleted during formatting!
To format the specified storage volume, click [Start Formatting].
Explanation
The name of the storage volume in the operating
system file system is displayed here.
The name of the storage volume is displayed here.
Explanation
Here you can select the format in which the file
system should be created on the memory card.
The file system is created in Ext4 format.
Ext4
The files are not readable under Windows!
FAT The file system is created in FAT format.
Specify the name for the storage volume when
formatted.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 139
Manual