Device Description - WAGO 750-8215 Manual

WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB

Device Description

3
The controller 750-8215(PFC200; G2; 4ETH CAN USB) is an automation device
that can perform control tasks of a PLC. It is suitable for mounting on a DIN rail
and stands out on account of its various interfaces.
This controller can be used for applications in mechanical and systems
engineering, in the processing industry and in building technology.
You can connect all available I/O modules of the WAGO-I/O-SYSTEM 750 (750
and 753 Series) to the controller, enabling it to internally process analog and
digital signals from the automation environment, or to supply these signals to
other devices via one of the available interfaces.
Automation tasks can be executed in all IEC 61131-3-compatible languages with
the e!COCKPIT programming system.
The implementation of the task processing in the runtime system for Linux
been optimized with real-time extensions in order to provide maximum
performance for automation tasks. Web visualization is also provided as
visualization in addition to the development environment.
For IEC-61131-3 programming in CODESYS applications, the controller provides
60 MB of program and data memory (dynamically distributed) and 128 kB of
retentive memory (retain and flag variables) in an integrated NVRAM.
Four ETHERNET interfaces and the integrated switch allow the wiring:
•
interfaces X1 and X2
and
•
and X12.
All interfaces have a shared MAC address and support:
•
•
•
•
The following fieldbus circuits are implemented for exchange of process data:
•
Modbus
•
Modbus
•
PROFINET IO device
•
CANopen Master/Slave
In the controller, all input signals from the sensors are combined. After
connecting the controller, all of the I/O modules on the bus node are detected
In two separate ETHERNET networks with separate IP addresses for
In one PROFINET network with a shared IP address for interfaces X11
10BASE-T/100BASE-TX,
Full/half duplex,
Autonegotiation, and
Auto-MDI(X) (automatic uplink/crossover switching).
TCP Master/Slave
UDP Master/Slave
Version 1.2.0, valid from FW Version 03.02.02(14)
Device Description
®
has
Manual
25