Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
"Configuration of PLC Runtime Services" Page
7.8.1.25
The settings for various services of the enabled runtime system are shown on the
"Configuration of PLC Runtime Services" page.
7.8.1.25.1 "General Configuration" Group
Table 82: WBM "Configuration of PLC Runtime Services" Page – "General Configuration" Group
Parameters
Port Authentication
Password
Confirm Password
Click [Submit] to apply change. The change is effective immediately.
7.8.1.25.2 "e!RUNTIME" Group
Table 83: WBM "Configuration of CODESYS Services" Page – "e!RUNTIME Webserver" Group
Parameters
e!RUNTIME State
Webserver enabled
Port authentication enabled
Click [Submit] to apply change. The change is effective immediately.
Explanation
Enter the new password for port authentication.
Enter the new password again for confirmation.
Explanation
This displays the status of the e!RUNTIME system
(enabled/disabled).
Enable or disable the Webserver for the
e!RUNTIME web visualization.
Enter here whether a login is required for connecting
to the device. The user name is "admin" and the
password is specified under "General
Configuration".
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 145
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
