Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB
"Configuration of Cloud Connectivity" Page
7.8.1.31
On the page "Configuration of Cloud Connectivity" you can find the settings and
information for cloud access.
Observe the additional documentation!
You can find a detailed description of the "Cloud Connectivity" software package
with a controller and information on PLC programming in Application Note
A500920 in the Downloads area at www.wago.com!
7.8.1.31.1 "Software Version" Group
Table 90: WBM "Configuration of Cloud Connectivity" Page – "Software Version" Group
Parameter
Version
7.8.1.31.2 "Status" Group
Table 91: WBM "Configuration of Cloud Connectivity" Page – "Status" Group
Parameter
Operation
Data collections
Connection
Heartbeat
Telemetry data
transmission
Cache fill level
(QoS 1 and 2)
Explanation
The cloud plug-in version is displayed.
Explanation
The status of the cloud connectivity application is
displayed here.
This shows how many data collections have been
registered on the IEC application side for transfer to
the cloud.
The status of the connection to the cloud service is
shown here.
This shows the current heartbeat interval setting in
seconds.
This indicates whether transfer of data is enabled or
disabled.
This shows the fill level of the memory cache for
outgoing messages as a percentage.
Version 1.2.0, valid from FW Version 03.02.02(14)
Commissioning 151
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
