System Partition" Page; Current Active Partition" Group; Set Inactive Partition Active" Group - WAGO 750-8215 Manual

138 Commissioning
</dg_

"System Partition" Page

7.8.1.20
The settings for specifying the partition that the system will be started from are
shown on the "System Partition" page.

7.8.1.20.1 "Current Active Partition" Group

The partition currently in use is displayed here.

7.8.1.20.2 "Set Inactive Partition Active" Group

Click [Activate Partition] to start the system from a different partition at the next
controller reboot.
Ensure bootable partition!
A functional firmware backup must be present in the boot partition!
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
WAGO-I/O-SYSTEM 750
750-8215 PFC200; G2; 4ETH CAN USB