Table of Contents
Advertisement
Hardware description
Structure > Operating mode switch
3.2.6 Operating mode switch
General
48
CAUTION!
Please connect the CPU for approximately 1 hour to the power supply, so
that the internal buffering mechanism is loaded accordingly.
In case of failure of the buffer mechanism Date and Time 01.09.2009
00:00:00 set. Additionally, you receive a diagnostics message.
4.20 'Diagnostic entries' page 117
n
With the operating mode switch you may switch the CPU between STOP and RUN.
n
During the transition from STOP to RUN the operating mode START-UP is driven by
the CPU.
n
Placing the switch to MR (Memory Reset), you request an overall reset with following
load from memory card, if a project there exists.
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Ä Chap.
Advertisement
Table of Contents
