YASKAWA VIPA System SLIO Manual page 88

Deployment CPU 013-CCF0R00
Setting VIPA specific CPU parameters > Free Module Mapping
Variant 2: Reversed slots and modules are missing
(1): Target configuration
(2): Actual configuration
Determination of Mapping values of record set 0x7F:
n Byte 0: The module of Slot
n Byte 1: The module of Slot
Byte 2: The module of Slot
n
n Byte 3: The module of Slot
n Byte 4: The module of Slot
n Byte 5: The module of Slot
88
Slot Slot
target
1 1
2 -
3 2
4 3
5 4
6 -
= 1 is in the actual configuration at Slot
target
= 2 is not available in the actual configuration à Mapping = 0xFF
target
= 3 is in the actual configuration at Slot
target
= 4 is in the actual configuration at Slot
target
= 5 is in the actual configuration at Slot
target
= 6 is not available in the actual configuration à Mapping = 0xFF
target
Slot - The mapping always refers to the slot of the target configuration.
target
Slot - Slot of the actual configuration on which the module of the target configura-
actual
tion is located.
Mapping - For variant 2, Mapping corresponds to the value of Slot
actual configuration on which the module of the target configuration is
located. If a module from the target configuration is missing, for Mapping the
value 0xFF for "virtual module" is to be used.
Record set 0x7F
actual
Byte Mapping
0 0x01
1 0xFF
2 0x02
3 0x03
4 0x04
5 0xFF
actual
actual
actual
actual
VIPA System SLIO
= 1 à Mapping = 0x01
= 2 à Mapping = 0x02
= 3 à Mapping = 0x03
= 4 à Mapping = 0x04
actual
HB300 | CPU | 013-CCF0R00 | en | 19-30
, i.e. slot of the