YASKAWA VIPA System SLIO Manual page 134

Deployment I/O periphery
Counting > Parametrization
Hardware interrupt
Hardware gate opening
Hardware gate closing
On reaching comparator
Overflow
Underflow
Max. frequency
Counting signals/HW gate
Latch
134
Description
Hardware interrupt by edge 0-1 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 0-1 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt by edge 1-0 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 1-0 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt on reaching comparator
n enabled: Hardware interrupt when comparator is trig-
gered, can be configured via 'Characteristics of the
output'
n disabled: no hardware interrupt
Hardware interrupt overflow
n enabled: Hardware interrupt on overflow the upper
counter limit
n disabled: no hardware interrupt
Hardware interrupt on underrun
n enabled: Hardware interrupt on underflow the lower
counter limit
n disabled: no hardware interrupt
Description
Specify the max. frequency for track A/pulse,
track B/direction and HW gate
Frequency shortest permissible count pulse
1kHz 400µs
2kHz 200µs
5kHz 80µs
10kHz 40µs
30kHz 13µs
60kHz 6.7µs
Specify the max. frequency for the latch signal
Frequency shortest permissible latch pulse
1kHz 400µs
2kHz 200µs
5kHz 80µs
10kHz 40µs
30kHz 13µs
60kHz 6.7µs
VIPA System SLIO
Assignment
disabled
disabled
disabled
disabled
disabled
Assignment
60kHz
10kHz
HB300 | CPU | 013-CCF0R00 | en | 19-30