Table of Contents
Advertisement
VIPA System SLIO
"Initialization"
HB300 | CPU | 013-CCF0R00 | en | 19-30
The assignment of IP address data takes place via the MAC address. The IP address of
your Ethernet PG/OP channel for the interfaces X1 and X2 can be found on the front of
your CPU with the name "MAC PG/OP: ...".
X1 PG/OP
X2 PG/OP
MAC PG/OP: 00-20-D5-77-05-10
The assignment of the IP address data happens online in the SPEED7 Studio with the
following proceeding:
1.
Start the SPEED7 Studio with your project.
2.
Click in the Project tree at 'Devices and networking' .
ð You will get a graphical object view of your CPU.
3.
Click at the network 'PG_OP_Ethernet' .
4.
Select 'Context menu è Determine accessible partner'.
ð A dialog window opens.
5.
Select the according network interface card, which is connected to the Ethernet
PG/OP channel and click at 'Search' to determine the via MAC address reachable
device.
ð The network search is started and the found stations are listed in a table.
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Hardware configuration - Ethernet PG/OP channel
275
Advertisement
Table of Contents
