YASKAWA VIPA System SLIO Manual page 349

VIPA System SLIO
Event ID
0xEA50
0xEA51
0xEA52
0xEA53
0xEA54
0xEA55
0xEA56
HB300 | CPU | 013-CCF0R00 | en | 19-30
Description
PROFINET IO controller: Error in the configuration
OB: Not user relevant
PK: Not user relevant
ZINFO1: Rack/slot of the controller
ZINFO2: Device number
ZINFO3: Slot at the device
DatID: Not user relevant
PROFINET IO controller: There is no PROFINET IO controller at the configured slot
PK: Not user relevant
ZINFO1: Rack/slot of the controller
ZINFO2: Recognized type identifier at the configured slot
DatID: Not user relevant
PROFINET IO controller: Too many configured PROFINET IO controllers
PK: Not user relevant
ZINFO1: Number of configured controllers
ZINFO2: Slot of the excessively configured controller
DatID: Not user relevant
PROFINET IO controller: Too many configured PROFINET IO devices
ZINFO1: Number of configured devices
ZINFO2: Slot
ZINFO3: Maximum possible number of devices
PROFINET IO controller: Multiple configuration of a periphery address or range too long
0: Error type
0: No error
1: Range too long
2: Input address already used
3: Output address already used
PK: Not user relevant
ZINFO1: Logical address of the IO system
ZINFO2: Rack/slot of the controller
ZINFO3: Base address of the block which is too large
DatID: Not user relevant
PROFINET IO controller: Too many slots or too high slot number configured
ZINFO1: Rack/slot of the controller
ZINFO2: Device number
ZINFO3: Number of configured slots or too high slot number
PROFINET IO controller: Too many subslots or too high sub slot number configured
ZINFO1: Rack/slot of the controller
System specific event IDs
349