Table of Contents
Advertisement
VIPA System SLIO
Registration of SPEED7
Studio in the Siemens TIA
Portal as
OPC UA Configurator
HB300 | CPU | 013-CCF0R00 | en | 19-30
SPEED7 Tools Integration is automatically listed in the Windows Start menu during the
installation of the SPEED7 Studio.
1.
To start the SPEED7 Tools Integration, click in the Windows Start menu on
'VIPA GmbH è SPEED7 Tools Integration'.
ð For SPEED7 Tools Integration can start, you have to acknowledge the security
prompt to change the data on your computer with 'Yes' . Afterwards
SPEED7 Tools Integration will be started.
2.
Click at 'GSDML ...' .
3.
Navigate to your GSDML file of your VIPA-CPU, which you also use for your config-
uration in the Siemens 'TIA Portal' . Select these and click at 'Confirm' . You can
also select and use several GSDML files.
ð The identified GSDML files are listed and the selection for the configuration
tools is enabled.
4.
Select 'TIA Portal' , in which the SPEED7 Studio is to be registered as
OPC UA Configurator.
5.
Click on 'Start' .
n
SPEED7 Studio is registered in the Windows registry as
ð
OPC UA Configurator.
In the Siemens TIA Portal the OPC UA Configurator is registered as exter-
n
nally callable program.
n
The current Windows user is registered in the user group Siemens TIA
Openness of the Siemens TIA Portal.
n
All changes are recorded in a log file, which you can output via 'Log file' .
6.
'Close' closes SPEED7 Tools Integration.
ð With the next start of the Siemens TIA Portal, the SPEED7 Studio can be called
as OPC UA Configurator with to OPC UA configuration limited functions. More
information about the usage can be found in the in the online help of the
OPC UA Configurator.
Usage in Siemens TIA Portal > Installation OPC UA Configurator
Deployment OPC UA
197
Advertisement
Table of Contents
