YASKAWA VIPA System SLIO Manual page 343

VIPA System SLIO
Event ID
0xE82C
0xE82D
0xE82E
0xE82F
0xE830
0xE831
0xE832
0xE833
0xE8FB
0xE8FC
0xE8FE
0xE8FF
0xE901
0xE902
0xE904
0xE90A
0xE910
0xE911
HB300 | CPU | 013-CCF0R00 | en | 19-30
Description
ZINFO3: Error code
CMD - auto command: WEBVISU_PGOP_ENABLE recognized and executed
CMD - auto command: WEBVISU_PGOP_DISABLE recognized and executed
CMD - auto command: WEBVISU_CP_ENABLE recognized and executed
CMD - auto command: WEBVISU_CP_DISABLE recognized and executed
CMD - auto command: OPCUA_PGOP_ENABLE recognized and executed
CMD - auto command: OPCUA_PGOP_DISABLE recognized and executed
CMD - auto command: OPCUA_CP_ENABLE recognized and executed
CMD - auto command: OPCUA_CP_DISABLE recognized and executed
CMD - auto command: Error: Initialization of the Ethernet PG/OP channel by means of SET_NETWORK is
faulty
CMD - auto command: Error: Some IP parameters missing in SET_NETWORK
CMD - auto command: Error: CMD_START not found
CMD - auto command: Error while reading CMD file (memory card error)
Checksum error
ZINFO1: Not user relevant
ZINFO2: Not user relevant
DatID: Not user relevant
Internal error - Please contact the hotline!
ZINFO1: Not user relevant
ZINFO2: Not user relevant
DatID: Not user relevant
PG/OP: Multiple parametrization of a peripheral address
ZINFO1: Peripheral address
ZINFO2: Slot
ZINFO3: Data width
DatID: 0x54 Peripheral address is input address
DatID: 0x55 Peripheral address is output address
PROFINET configured, but access way disabled
ZINFO1: Logical address of the IO system
ZINFO3: Station number
ZINFO3: IO system ID
ZINFO3: System ID DP/PN
PG/OP: Input peripheral address out of peripheral area
ZINFO1: Peripheral address
ZINFO2: Slot
ZINFO3: Data width
PG/OP: Output peripheral address out of peripheral area
ZINFO1: Peripheral address
System specific event IDs
343