YASKAWA VIPA System SLIO Manual page 97

VIPA System SLIO
ARM Processor Load
Measurement Cycle Time
Last Value
Average Of Last 10 Values
Minimum Load
Maximum Load
Tab: 'IP'
Tab: 'Firmware'
Tab: 'Access Ways'
4.11.1.1.1 Tab: 'OPC UA'
HB300 | CPU | 013-CCF0R00 | en | 19-30
100 ms
9%
10%
9%
23%
Here the IP address data of your Ethernet PG/OP channel are shown.
As of CPU firmware version V3.0.0, you can transfer the firmware file online to the CPU
via the 'Firmware' tab. The firmware update in the CPU is triggered by means of the
operating mode switch.
As of CPU firmware version V3.0.0, information about access settings is shown here. In
the delivery state, there are no restrictions. You can specify access to interfaces, ports
and protocols via the parametrization.
ters' page 82
As of CPU firmware version V3.0.0, information about the OPC UA project is shown here.
Ä Chap. 7 'Deployment OPC UA' page 183
For your CPU can process a OPC UA project, you have to activate the
OPC UA functionality.
page 192
Accessing the web server > Device web page CPU
CPU
Information for the support
Ä Chap. 4.14 'Firmware update' page 106
Ä Chap. 4.9 'Setting VIPA specific CPU parame-
Ä Chap. 7.3 'Activate OPC UA functionality'
Deployment CPU 013-CCF0R00
97