Table of Contents
Advertisement
Deployment CPU 013-CCF0R00
Deployment storage media - VSD, VSC
Accessing the storage
medium
112
CAUTION!
Please regard that the VSC must remain plugged when you've enabled
optional functions at your CPU. Otherwise the SF LED is on and the CPU
switches to STOP after 72 hours. As soon as an activated VSC is not
plugged, the SF LED is on and the "TrialTime" counts downwards from 72
hours to 0. After 72 hours the CPU switches to STOP state. By plugging
the VSC, the SF LED expires and the CPU is running again without any
restrictions.
The VSC cannot be replaced by a VSC of the same optional functions.
The activation code is fixed to the VSD by means of an unique serial
number. Here the function as an external memory card is not affected.
To the following times an access takes place on a storage medium:
After overall reset
n
The CPU checks if a VSC is inserted. If so, the corresponding optional functions are
enabled.
n
The CPU checks whether a project S7PROG.WLD exists. If so, it is automatically
loaded.
After PowerON
n
The CPU checks whether a project AUTOLOAD.WLD exists. If so, an overall reset is
executed and the project is automatically loaded.
n
The CPU checks whether a command file with the name VIPA_CMD.MMC exists. If
so the command file is loaded and the commands are executed.
n
After PowerON and CPU STOP the CPU checks if there is a *.pkb file (firmware file).
If so, this is shown by the CPU by blinking LEDs and the firmware may be installed by
an update request.
Ä Chap. 4.14 'Firmware update' page 106
In STOP state when inserting a memory card
n
If a memory card is plugged in STOP state, which contains a command file
VIPA_CMD.MMC, the command file is loaded and the containing instructions are exe-
cuted.
The FC/SFC 208 ... FC/SFC 215 and FC/SFC 195 allow you to include
the memory card access into your user application. More can be found in
the manual "Operation list".
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 19-30
Advertisement
Table of Contents
